ACT HANDKEY II Betriebsanweisung PDF herunterladen (Seite 9)

HandKey II Manual

Size: 8.85 inches wide by 11.65 inches high by 8.55 inches deep (22.3

cm)

22.3 cm wide by 29.6 cm high by 21.7 cm deep

Power: 12 to 24 VDC or 12 to 24 VAC 50-60 Hz, 7 watts

Weight: 6 lbs (2.7 kg)

Wiring: 2 twisted-pair, shielded, AWG 22 or larger (such as Belden

82732)

Temperature: -10C to +60C – non-operating/storage (14F to 140F)

0C to 45C – operating (32F to 113F)

Relative Humidity

Non-Condensing:

5% to 85% – non-operating/storage

20% to 80% – operating

Veriﬁcation Time: 1 second or less

Memory Retention: 5 years using a standard internal lithium battery

Transaction Buffer: 5120 transactions

ID Number Length: 1 to 10 digits

Baud Rate: 300 to 28.8 K bps

Communications: RS-232, RS-422, RS-485 2-wire, optional Ethernet, optional

Modem

User Capacity: 512 users expandable to 259,072

Card Reader Input: Proximity, Wiegand, Magnetic Stripe, Bar Code

(5 VDC provided by HandReader)

Card Reader Output: Wiegand, Magnetic Stripe, Bar Code

Duress Code: 1 leading digit, user deﬁnable

Door Controls: Request to Exit input, Door Switch input, Lock output (open

collector, 5 VDC present, sinks to ground, 100 mA max)

Alarm Monitoring: Tamper, Door Forced, Duress

Event Monitoring: There is a variety of monitoring options including events such as:

Invalid ID, Time Zone Violation, ID Refused, Try Again,

Power Failure

Time Zones: 62 total – 2 ﬁxed, 60 programmable

Auxiliary Outputs: 3 user deﬁnable

(open collector, 5 VDC present, sinks to ground, 100 mA max)

Auxiliary Inputs: Auxiliary Input 1 and 2 (open collector, 5 VDC present, sinks to

ground, 100 mA max)

Speciﬁcations

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 87 88

Keine Kommentare

ACT HANDKEY II Betriebsanweisung Seite 9