ACT ACTENTRY V-IP Installationshandbuch PDF herunterladen (Seite 12)

ACTentry V-IP Operating and Installation Manual

Page 11

1. When the red LINK LED and the green TX/RX LED flash slowly

(about once per second), the ACTentry V-IP controller unit is

powered but not connected to the network.

2. When the red LINK LED is on, the ACTentry V-IP is successfully

connected to the network.

3. The green TX/RX LED beside the LAN indicates data

transmission between the network and the device.

2.5 ACT handset and PC speaker connection

1. The ACT USB handset should be connected to an available USB slot

on the PC.

2. The PC speakers should be connected to the PC sound card and

switched on.

2.6 ACTpro-X 1030 Panel-Mount reader installation

ACTentry V-IP may be used in conjunction with an ACTpro access control

system. Cardholders present their proximity cards to the panel mount reader

to gain access. Visitors use the call button on the door panel.

Please see the ACTpro-X 1030 panel mount installation diagram at end of this

manual.

The ACTSmart1070 Panel Mount Reader may also be used with the

ACTentry V-IP. This is suitable for smaller systems with fewer cardholders

and doors (less than 16).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 29 30

Keine Kommentare

ACT ACTENTRY V-IP Installationshandbuch Seite 12